0. LEGISLATIVE PROVISIONS 0.1. NAME OF STANDARD 0.1.1. This Standard is the Vehicle Standard (Australian Design Rule 53/00 – Front and Rear Position Lamps, Stop Lamps, Direction Indicators and Rear Registration Plate Lamps for L-Group Vehicles) 2006. 0.1.2. This Standard may also be cited as Australian Design Rule 53/00 — Front and Rear Position Lamps, Stop Lamps, Direction Indicators and Rear Registration Plate Lamps for L-Group Vehicles. 0.2. COMMENCEMENT 0.2.1. This Standard commences on the day after it is registered. 0.3. REPEAL 0.3.1. This Standard repeals each vehicle standard with the name Australian Design Rule 53/00 — Front and Rear Position Lamps, Stop Lamps, Direction Indicators and Rear Registration Plate Lamps for L-Group Vehicles that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. 0.3.2. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 53/00 — Front and Rear Position Lamps, Stop Lamps, Direction Indicators and Rear Registration Plate Lamps for L-Group Vehicles, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard. 1. SCOPE This Australian Design Rule (ADR) prescribes the photometric requirements for front position lamps, rear position lamps, stop lamps, direction indicators and rear registration plate illuminating devices intended to be fitted to mopeds, motor cycles and vehicles treated as such. 2. APPLICABILITY AND IMPLEMENTATION 2.1. The circumstances under which front and rear position lamps, stop lamps, direction indicators and rear registration plate lamps are mandatory, optional, or prohibited are set out in either ADRs 13/…, 19/… or 67/…. 3. DEFINITIONS 3.1. Refer to paragraph 2 of Appendix A.